An Overview on Polished Concrete Flooring in Atlanta

There’s just something about polished concrete flooring in Atlanta. It might be the sheen, maybe the smooth surface, but there’s no denying it. Polished floors are beautiful in any home, workspace, sidewalk, or decoration. Getting good polished concrete flooring in Atlanta doesn’t have to be a hassle.


The Benefits of Polished Concrete Flooring in Atlanta

A polished floor has a lot of benefits. The appeal is obvious, but more than that concrete floor polishing in Atlanta is practical. Polished floors are easier to clean for one. You don’t have to worry about dirt and grime sticking inside the porous surface. It’s also safer in the event of falls. If you’ve ever run your hand on a sidewalk, you can imagine how bad that could be. With a smooth surface many such scrapes can be avoided or reduced.

Common Techniques for Concrete Floor Polishing in Atlanta

The best way to handle concrete floor polishing, is to start from scratch. This isn’t always the most convenient option, but if you are lucky enough to be starting as a new project you can do it right. First you pour the concrete into place. Then you smooth out the corners, and finally use a float to smooth the surface. Make sure to cure everything the right amount, and use the right tools for the job. This process can take several days. If you want to have any patterns carved into the surface, this is the time to do it.

Now, you’ll want to check your concrete for any issues. Remove any dried adhesives, dust, dirt, grime, etc. You’ll need the surface clean for this. The next step is essentially sanding the surface down. This is a bit more complicated with concrete than wood, but it’s very similar. You can do dry or wet polishing. It’s usually recommended to start with dry polishing and finish with wet concrete floor polishing in Atlanta.

Polishing entails the use of a machine you push around the concrete. It grinds the surface of the concrete down. You’ll normally switch from a coarse grind down to every finer ones during the process. The Early passes get rid of the most material and generate a lot of dust. Use a vacuum filtration system to clear the air. Later on you’ll be shining and smoothing the the floor, and wet polishing is common here to help with the finer grind.

Two coatings are usually applied during the process. A hardener that helps strengthen the concrete is added in the middle, and a finisher that protects from stains is added at the end. These help maintain the concrete.